汽车密封条C6工位工序动作平衡与仿真
汽车密封条 C6 工位工序动作平衡与仿真 摘 要 本文是对北京万源瀚德汽车密封系统长春分公司 audiC6 工位的实 习考察的根底上,获取原始资料,在排好各工艺流程内容的根底之上,运用模特 法对生产线每个工位的操作动作进行分析,以确定各操作单元的操作时间。同时, 根据实际情况确定出生产线的节拍,结合操作时间和节拍确定生产线平衡率.通 过对生产线进行平衡并利用“5W1H〞提问法以及“ECRS〞原那么对生产线进行适当的 改进并完成 C6 工位工序动作平衡的设计任务。本文利用 Flexsim 这一软件工具 对 C6 工位的运行过程进行了仿真,找出了在生产线运行过程中出现的阻塞和等 待问题并对此进行了分析. 关键词:生产线平衡,MOD,仿真,节拍 Abstract This article is Haldex Beijing Wan Yuan Changchun Automotive Sealing Systems Co., Ltd. Branch audiC6 inspection station on the basis of the internship to obtain the original ination content in the line up on the basis of the process, the use of model laws on the production line for each work bit operating movements were analyzed to determine the operating unit s operating time. Meanwhile, according to the actual situation to determine the production line to the beat, combined with operating time and beat to determine line balance rate, through the production lines to balance and use of “5W1H“ questions law, and “ECRS“ principle of production appropriate to improve and complete the C6-position process Action balanced design tasks. In this paper, the software tool Flexsim C6-position of running the simulation, identified during the operation of the production line blocking and waiting for problems to occur, and this is analyzed. Keywords: line balancing, MOD, simulation, beat 目 录 1 绪论1 1.1 课题研究背景 .1 1.2 当前汽车密封条的开展形势 .1 1.3 汽车密封条的生产工艺 .2 1.4 实习公司简介 .2 1.5 国外汽车密封条开展情况 .3 2 流水线及人因工程学简介4 2.1 流水线的概念与特征 .4 2.2 流水线的节拍设定及平衡率计算 .5 2.3 人因工程学 .5 人因工程概述5 人因工程的目的6 3 C6 工位工序动作平衡分析设计 .1 3.1 动作分析概述 .1 3.2 动作分析方法用途 .